Skip to content

Home / Gear Guides / Pool Cues

Buying guide

Choosing a pool cue.

The specs that matter are few: length, weight, joint, shaft and tip. Much of what separates a cheap cue from an expensive one is artwork.

How we recommend

We recommend cues by type and player level, not by brand, and we do not quote prices. We may earn a commission on purchases at no cost to you.

What matters

  • Length. 58 inches is standard for adults; shorter players and tight rooms call for 52 or 48 inches. (Length by height)
  • Weight. Most playing cues are 18 to 21 ounces, with 19 the most common. Heavier does not guarantee more speed, and lighter does not guarantee more spin.
  • Joint. A common pin like 5/16 x 18 or 3/8 x 10 keeps upgrade shafts easy to find. Steel joints feel stiffer, wood-to-wood softer.
  • Shaft. PoolDawg recommends North American hard rock maple and advises avoiding ramin wood, which is common in blister-pack cues, and avoiding titanium or aluminum shafts.
  • Tip. Standard diameters run about 12.75 to 13 mm. Layered tips are the most popular style today; solid tips are the inexpensive option.
  • Wrap. Irish linen absorbs moisture; PoolDawg ranks linen as the slickest, then leather and wrapless, then synthetic or sport wraps; nylon wraps appear mostly on cheap cues and tend to unravel.

What you are paying for

PoolDawg's view is that higher prices mostly reflect artwork and design rather than performance, and it cites a cue line whose cheapest and most expensive models play the same. Exotic woods and inlays are premium markers, but they do not change how the cue hits. Warranties are a real difference: about a year on entry cues, up to limited or full lifetime coverage on mid and high-end cues, some covering warping.

Is a low-deflection or carbon shaft worth it?

Off-center hits push the cue ball off your aim line ("squirt"), and Dr. Dave Alciatore attributes squirt almost entirely to the mass at the end of the shaft, roughly its last 5 to 8 inches. Low-deflection shafts reduce that end mass. In his measurements, carbon fiber shafts showed squirt similar to light wood low-deflection shafts. Pool Table Portfolio says graphite and fiberglass shafts are less affected by humidity and temperature than wood; none of our sources says the same of carbon fiber specifically. The catch: switching changes how much you must compensate when aiming with english, so you will need to relearn it. If you rarely use side spin yet, a standard maple shaft is fine to learn on.

Our picks by player level

PICK 1

Two-piece beginner cues

A maple shaft, a common joint, a decent layered or solid tip and a sensible warranty. Skip blister-pack cues with ramin shafts.

Best for: New players replacing house cues

PICK 2

Playing cues

A better tip, a better wrap and a longer warranty. The upgrade you will feel is in the shaft and tip, not the inlays.

Best for: League players who play weekly

PICK 3

Low-deflection shafts

Fits your existing cue if the joint matches. Expect to relearn your aim with english.

Best for: Players who use side spin regularly

PICK 4

Carbon fiber shafts

Squirt similar to light wood low-deflection shafts in Dr. Dave's tests. Predator recommends a hard case for carbon shafts, which resist warping but can chip.

Best for: Players who want low deflection

PICK 5

Cue cases

Sizes are written butts x shafts; Predator says a 2x4 suits most players. Hard cases protect more, soft cases are lighter.

Best for: Anyone who owns a cue

Look after it

McDermott recommends storing cues at about 70°F and 40 to 50 percent humidity, on a straight rack away from outside walls, and avoiding shaft products that contain wax or oil. Never leave a maple shaft in a hot car.

Keep reading

Disclosure TheGearSports Billiards is reader-supported. When you buy through links on our site, we may earn an affiliate commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. Our recommendations are independent.